About this guide
A sticker cutting machine with auto feeding picks up label sheets, then half-cuts and creases them. A3 Max 4, A3 Max 5, and A3 Max 6 are sheet cutting machines. A dual head can cut and crease on one pass. People also search this as a Skycut A3 Max or Skycut A3 Max 4.
In this guide
- Sticker sheets, not vinyl rolls
- Daily output needs the full setup
- Two heads for cut and crease
- Test the sheets you already print
- Count minutes, not motor speed
- What auto feeder means on a label cutting machine
- Quick Comparison
- Which One Should You Follow?
1. Sticker sheets, not vinyl rolls
What it is
A label cutting machine works on printed sticker sheets. A roll vinyl cutter cannot pick up the next sheet.
Points to check
- A roll vinyl cutter can do the cut. It cannot pick up the next sheet while you weed.
- Auto feeder machines in the A3 Max family are built for that pile of printed sheets.
- Models include one head, two heads, and faster servo versions.
2. Daily output needs the full setup
What it is
Feeding comes first. A fast head on a badly fed sheet is only a fast reject.
Points to check
- The camera or sensor must work on your real print, not only on a demo file.
- Order the blade and the crease tool together with the sticker cutting machine.
- Check that the A3 sheets you already buy will sit in the feeder.
3. Two heads for cut and crease
What it is
Two heads matter when the job needs a cut and a crease.
Points to check
- Leave both tools loaded so nobody swaps holders between designs.
- A dual-head A3 Max is there so the stack does not stop in the middle.
- A die cutting machine for thick board is a different tool. Do not force cartons through a sticker feeder.
4. Test the sheets you already print
What it is
Bring your own sheets to the demo, not a file made for the showroom.
Points to check
- Include the odd A3 size and the sheet that curls after printing.
- Watch the line-up on sheet ten and sheet fifty, not only sheet one.
- An auto feeder that only works on fresh demo paper will mis-feed the pile that pays the rent.
5. Count minutes, not motor speed
What it is
Time a stack of 50 same sheets, including weeding.
Points to check
- That minute count is your real capacity, not the motor speed on the box.
- The person who used to stand between sheets is the cost you are removing.
- An auto feeder pays for itself when that person can do other work.
6. What auto feeder means on a label cutting machine
What it is
People looking for a sticker cutting machine or label cutting machine are often half-cutting sheets, not a long vinyl roll.
Points to check
- An auto feeder picks the next sheet while you weed.
- A3 Max, A3 Max 4, A3 Max 5, and A3 Max 6 are questions about size and one head or two heads.
- If the job is crease and cut for small boxes, look at a box plotter instead.
People looking for a sticker cutting machine or label cutting machine are often half-cutting sheets, not a long vinyl roll.
Quick Comparison
At a glance — the points in this guide, in the same order as the sections above.
| Point | What to check |
|---|---|
| Sticker sheets, not vinyl rolls | A label cutting machine works on printed sticker sheets. A roll vinyl cutter cannot pick up the next sheet. |
| Daily output needs the full setup | Feeding comes first. A fast head on a badly fed sheet is only a fast reject. |
| Two heads for cut and crease | Two heads matter when the job needs a cut and a crease. |
| Test the sheets you already print | Bring your own sheets to the demo, not a file made for the showroom. |
| Count minutes, not motor speed | Time a stack of 50 same sheets, including weeding. |
| What auto feeder means on a label cutting machine | People looking for a sticker cutting machine or label cutting machine are often half-cutting sheets, not a long vinyl roll. |
Which One Should You Follow?
Sticker cutting machine with auto feeder
Sticker sheets, not vinyl rolls
→ Sticker cutter
A roll vinyl cutter can do the cut. It cannot pick up the next sheet while you weed.
Daily output needs the full setup
→ Sticker cutter
The camera or sensor must work on your real print, not only on a demo file.
Two heads for cut and crease
→ Sticker cutter
Leave both tools loaded so nobody swaps holders between designs.
Test the sheets you already print
→ Sticker cutter
Include the odd A3 size and the sheet that curls after printing.
Count minutes, not motor speed
→ Sticker cutter
That minute count is your real capacity, not the motor speed on the box.
What auto feeder means on a label cutting machine
→ Sticker cutter
An auto feeder picks the next sheet while you weed.